Dear PEI Member:
It has been a little over two years since refineries were required to
produce a diesel fuel with much lower sulfur levels (S15) than previously
used (S500). The switch-over went smoothly and, quite frankly, we didn't
expect to see any problems in storing, metering or dispensing the new ultra
low sulfur diesel fuel. We are now, however, receiving reports that the new fuel
is adversely affecting some petroleum equipment.
It seems in some cases that ultra low sulfur diesel is corroding metal
components of the diesel storage system and causing filters and strainers to
clog with rust. One member investigated several storage systems--all with
fiberglass tanks--and found corrosion in the tank riser pipes, inside the
STP housing, at the pipe above the STP and the pipe fittings at the STP, and
inside the strainer housing. Another member reports rust inside the
dispenser fittings before the strainer. Contributors to the PEI Forum (www.pei.org/forum)
report gasket and seal problems in pumps and meters and rust clogging PLLDs,
functionals, etc.
The reports we are receiving do not appear to reference isolated
instances, but instead identify a problem that ultra low sulfur diesel
marketers and users might have to deal with as long as they use fuel made to
the ASTM D-975 specification. Comments are invited.
PEI ELECTIONS COMPLETED: EICHORN, MILO AND LONG ELECTED
Runoff elections have been completed in PEI Manufacturer Districts 10
and 12, and the Affiliate Division. The three newly-elected directors,
together with the four elected last month, will join eight incumbent
directors on the 2008-2009 PEI Board of Directors. The seven directors will
be installed October 6 as members of the PEI Board during the association's
annual membership meeting and lunch at PEI's convention in Chicago. The
three members elected last Friday to the PEI Board of Directors are:
|
Compatibility Problems with ULSD?
PEI Runoff Election Results
Chicago
Convention Registration List Available

Use Your Time Wisely!
learn how to use NACS Show Connect to plan your trade show
visit
Register Now

Respond to this Newsletter
by
e-mail to the editor, Robert Renkes at
rrenkes@pei.org
or join
the discussion in the Petroleum
Equipment Forum
to
unsubscribe or change preferences see below. |
- Al Eichorn, PMP Corporation, Avon, Connecticut. He will
represent Manufacturer District 10. Eichorn will succeed Randy Dixon,
Dixon Pumps, Billings, Montana.
- Robert J. Milo, Universal Valve Company, Inc., Elizabeth, New
Jersey. Milo will represent Manufacturer District 12 and succeed Martin
Pettesch, also from Universal Valve Company.
- Erik Long, Walsh, Long & Company, Inc., Naperville, Illinois.
Long will represent the Affiliate Division. He will succeed Robert Dendy,
Petro Energy, Inc., Houston, Texas.
PEI CONVENTION REGISTRATION LIST AVAILABLE
Preregistration for PEI's Convention October 5-7 in
Chicago is up 3 percent compared to the same time last year. Log in
here to
view and download the most recent list of those attending the convention.
ALI TO
REVISE AUTOMOTIVE LIFT INSTALLATION AND SERVICE STANDARD
The Automotive Lift Institute, Inc. (ALI) is in the process of
revising its Standard for Automotive Lifts - Safety Requirements for
Installation and Service. This standard provides guidance to the
installer and service technician for the installation and service of
automotive lifts including the required qualification, training, reporting
and documentation for installers and service personnel. The standard also
provides sample forms and checklists for use by installers and service
personnel attempting to comply with the standard. INTERNATIONAL
MARKETING NOTES
Brazil's Ultrapar Participacoes said August 14 that it will buy
Texaco's fuel distribution assets in Brazil for about $715 million.
Texaco will sell a network of about 2,000 service stations and 48 terminal
operations. After the deal is completed, Ultrapar will have more than
5,000 service stations throughout the country, which will give it about 23
percent of Brazil's fuel market.
Ireland's DCC said it reached an agreement to buy Chevron's
fuel distribution subsidiary in the United Kingdom for $41 million.
Brazil's Petrobras has signed a deal to buy Exxon Mobil Corp.'s
stake in Esso Chile Petrolera for $400 million. The assets include 209
service stations, among other things. BRIEFLY NOTED
Petroleum Solutions Inc., headquartered in McAllen, Texas, has hired
Mike Vegeais as corporate sales manager. Vegeais, who has spent the last 28
years with Gilbarco in various sales management roles, will join PSI
September 1.
AE Biofuels opened an integrated cellulosic ethanol demonstration
plant earlier this month in Butte, Montana. The 9,000 square-foot
facility is the first to integrate the use of both cellulose- and
starch-based feedstocks. MEMBERSHIP APPLICATIONS
New York distributor. Franklin Equipment Services Corporation, 22-04
119th Street, 2nd Floor, College Point, New York 11356, has applied for
distributor division membership. Sarah W. Klein is president of the
firm, which was established in 2007. The company represents B&KTkGauge,
CNIMfg, CntmtSoltn, Diversified, Federal, Fibrelite, Flex-Ing, Formex,
Gasboy, GasAdProd, Gilbarco, HuskyCorp, LSI, OPW-FC, PetroMeter, PMPCorp,
Universal, VST, Vaporless and VeederR in the New York City metropolitan
area. Sponsored for PEI membership by Robert J. Milo, Universal,
Elizabeth, NJ.
Colombia distributor. AIC Ltda., Calle 70Abis #17-29, Bogota,
Colombia, has applied for distributor division membership. Juan
Carlos Lopez is the general manager for the firm,
which was established in 2003. AIC represents Federal, Franklin and LSI.
Sponsored for PEI membership by Jay Walsh, Franklin, Madison, WI.
Positive displacement pump manufacturer. Roper Pump Company, P. O. Box
269, Commerce, Georgia 30529, has applied for manufacturer division
membership. David E. Neisler is marketing manager for the firm, which was
established in 1857. The company not only manufactures positive
displacement pumps, helical gear pumps, and progressive cavity pumps, but
also designs and develops custom engineered pumps which are sold through PEI
distributors. Sponsored for PEI membership by Phil Farrell, DoublCheck,
Kansas City, MO.
California manufacturers representative. William Robbins Associates,
Inc., P. O. Box 1936, Lafayette, California 94549, has applied for
affiliate division membership. Bill Robbins is president of the firm,
which was established in 1986. The company represents Ameron, Cim-Tek,
PMPCorp and Xerxes. Sponsored for PEI membership by Al Eichorn, PMPCorp, Avon,
CT, and Kristi Peterson, Xerxes, Minneapolis, MN.
Alberta service and construction firm. Bar W Petroleum & Electric,
Division of United Farmers of Alberta, 200 Burnt Lake Business Park, 28042
Highway 11, Red Deer, Alberta T4S 2L4, has applied for service and
construction division membership. Darcy C. Teichroeb is senior manager for
the firm, which was established in 1988. The company specializes in
computerized fuel systems and provides electrical contracting and service.
Sponsored for PEI membership by Paul McKay, KellrEqLtd, Calgary, AB.
Indiana pump service firm. Tech Petroleum, 7525 Woodmar Avenue,
Hammond, Indiana 46323, has applied for service and construction division
membership. Chodray A. Akbar is president of the firm, which was
established in 1997. The company provides parts, offers service, and
repairs dispensing pumps and signage. Sponsored for PEI membership by Doc Boehme, BottomLine, Osakis, MN, and Rod Smith, Freedom, Kennesaw, GA.
Maryland storage and dispensing systems installer. Total
Environmental Concepts, Inc., 15 Park Avenue, Gaithersburg, Maryland
20877, has applied for membership in the service and construction division
of PEI. Theodore Bedell III is president of the firm, which was
established in 2000. The company installs and services petroleum storage
and dispensing systems. Sponsored for PEI membership by Galen C. Heaps,
PetroSupMD, Laurel, MD. ADMITTED TO PEI
- Turner's Pump Shop, Dothan, AL (dis)
- CAD Fuel Design, Roanoke, VA (aff)
- DTE Group Pty. Ltd., Yangebup, Australia (aff)
- Shenyang Daming Motor Co., Ltd., Shenyang, Liaoning, China (aff)
- Penn Environmental Services, Gibsonton, FL (S&C)
- Premium Electric, LLC, Glen Burnie, MD (S&C)
- CDP Inc., Mandan, ND (S&C)
- Damon Bastin, Hess Corporation, Coral Springs, FL (O&E)
|